How to Sew a Beautiful and Simple Ruffled Stove Skirt

Some links in this post may be affiliate links. That means I might make a small commission on qualifying purchases if you click the link. There is no extra cost to you.

I saw a similar stove skirt on social media a few weeks ago and decided to make one. Not a week later, my Mom sent me a screenshot of one. She wanted me to teach her how to make it, especially since she was looking for a ruffled stove skirt pattern. I told her I would get to work making a tutorial on how to sew a handmade stove skirt.

a ruffled stove skirt made with a whimsical chicken print fabric and a ruffle at the bottom, tied onto the handle of an oven door

This ruffled stove skirt that I sewed at my kitchen table only used one yard of my favorite chicken-print cotton. I kept the main panel flat so you can see the little blue chicken coops, then gathered a matching strip along the bottom. Seven narrow fabric ties fasten the skirt to the oven door handle. If you can sew a straight stitch, you can make every part of this project.

A stove skirt is an easy way to change up a rental kitchen. There’s nothing to drill or stick to the appliance, and the whole thing unties when it’s time to move. I like it for seasonal decorating, too. I’d sew this same pattern in blue gingham for spring or red ticking stripe for Christmas.

Ruffled stove skirt pattern at a glance

  • Finished width: 24 inches
  • Fabric: 1 yard of woven cotton
  • Skills: Pressing narrow ties, sewing double-fold hems, and gathering a ruffle
  • Pattern: Measure-and-cut rectangles with a printable cutting guide. There are no paper pattern pieces to tape together.

Jump to cutting measurements 

A note about displaying your skirt. Hang it on a cool stove when the appliance is off. Remove it before using the oven or cooktop, and keep the fabric and ties clear of burners, vents, and controls. The U.S. Fire Administration advises keeping towels, curtains, and other flammable items away from the stovetop. Read the USFA’s cooking fire safety guidance.

how to sew a ruffled stove skirt pattern

Fabric, tools, and supplies for your ruffled stove skirt

  • 1 yard of woven cotton fabric. A small repeating print shows up nicely on both the main panel and the narrow ruffle. If you’re new to shopping by the yard, start with my beginner’s guide to buying fabric.
  • Fabric shears for cutting the panel, ruffle, and seven ties.
  • Polyester sewing thread set. Choose a color that blends with the background of your fabric if you want the stitching to disappear along the hems.
  • My favorite sewing machine. You’ll use its straight stitch and change the stitch length when you gather the ruffle.
  • Elmer’s purple glue stick. I use a light swipe to hold the narrow folds on the ties while I work.
  • Iron and pressing surface
  • Ruler or measuring tape
  • Sewing clips or straight pins

If you’re still getting comfortable with your machine, my beginner sewing guide is a good place to start. You can also keep my A–Z sewing terms glossary handy for terms like wrong side, basting, and seam allowance.

Cutting measurements and one-yard layout (also in the ruffled stove skirt pattern)

a cutting diagram for how to layout each pattern piece on a yard of fabric

Measure the usable span of your oven handle before cutting. The main panel starts at 25 inches wide. Each double-fold side hem takes up ½ inch, leaving a finished width of 24 inches.

All the measurements below include the hems and seam allowances. Choose one of the two ruffle options.

Pattern pieceHow many to cutCut size
Main panel125 inches wide × 20 inches tall
Fabric ties71½ inches wide × 22 inches long
Ruffle, cut in one piece150 inches wide × 5 inches tall
Ruffle, cut in two pieces225¼ inches wide × 5 inches tall each

How to fit a 50-inch ruffled stove skirt pattern onto narrower cotton

Lay your yard of fabric flat in a single layer. Place the seven ties beside the main panel, with their 22-inch lengths running down the yard. Together, the ties take up 10½ inches of width. Below them, place the two ruffle rectangles, one beneath the other.

This layout uses 35½ inches across and 32 inches down. If you prewash your fabric, measure it after washing and pressing. Leave the tightly woven selvage edges out of your usable width.

How to sew the ruffled stove skirt

a kitchen table lined with all the items to sew a stove skirt; fabric pieces cut out, a sewing machine, a paper pattern, and scissors

1. Cut the panel, ruffle, and seven ties

Before picking up your scissors, check the direction of the print. On my fabric, the roofs of the chicken coops need to point toward the top of the skirt. That goes for the ruffle, too. It’s easy to turn that long strip sideways when you’re trying to squeeze everything into one yard.

Cut the pieces using the chart above. If your cotton has at least 50 inches of usable width and the print runs the right way, you can cut the ruffle in one piece.

For a pieced ruffle, place the two rectangles right sides together and sew one pair of short ends together with a ¼-inch seam. Press the seam open. The joined strip measures 50 inches, and that little seam gives you a center mark for gathering later.

2. Make the seven fabric ties

Start with one 1½ × 22-inch strip. On each short end, turn ¼ inch of fabric toward the wrong side and press. Dab a little glue under the fold and press to dry. Folding the short ends first gives you a tidy finish at both tips of the tie.

Then work down the length of the strip:

  1. Fold the strip in half lengthwise, wrong sides together. Press a center crease, then open the strip again.
  2. Apply a light swipe of glue. Bring both long raw edges inward until they meet the center crease. Press the folds in place.
  3. Fold the strip closed along the original crease. All four raw edges should now be tucked inside.

Look at the two long edges before you sew. One side has a single fold. On the other side, two folded edges meet. Sew very close to the edge where those two folds meet to close the tie.

Repeat for the remaining six strips. I like to press the whole stack at the iron, then sit down at the machine and sew all seven.

3. Hem the bottom edge of the ruffle

Lay the ruffle wrong side up and find the bottom of the print. Fold that long edge ¼ inch toward the wrong side and press. Turn it up another ¼ inch and press again to enclose the raw edge.

Sew the bottom hem down. Straight-stitch the full length of the ruffle, staying close to the inner fold. Leave the two short ends unhemmed for now. You’ll finish them with the sides of the skirt.

4. Sew two rows of gathering stitches

a simple line drawing diagram showing how to sew gathering stitches, then sew fabric together without sewing over teh basting stitches

Set your machine to a 4 mm straight stitch. That setting controls how long each stitch is. The following measurements tell you how far each row sits from the edge of the fabric:

  • Sew the first row ¼ inch from the top raw edge of the ruffle.
  • Sew the second row ⅝ inch from that same raw edge.

Leave long thread tails at both ends of both rows. Skip the backstitching here so the bobbin threads can slide when you pull them.

Fold the ruffle in half end to end and make a tiny notch at the center of its top raw edge. Keep the notch shallow enough to stay inside the seam allowance. If you pieced the ruffle from two equal halves, use the joining seam as your center mark. Find and mark the center of the bottom edge of the main panel as well.

5. Gather the ruffle and attach it to the stove skirt panel

Lay the main panel right side up. Place the ruffle right side down on top of it. Match the ruffle’s top raw edge to the panel’s bottom raw edge. The hemmed edge of the ruffle will point toward the top of the panel for now. Match the center marks and clip them together.

At one end of the ruffle, hold the two bobbin-thread tails, one from each gathering row. Gently pull them together while sliding the fabric toward the clipped center. When the end of the ruffle lines up with the side of the panel, clip it in place. Repeat from the other end.

Spread the gathers evenly across each half, adding clips or pins as you go. I find it easier to adjust a few gathers at a time while the center stays clipped. If the threads won’t slide, check that you’re holding the two bobbin tails from the same end.

Switch your machine back to a 2.5 mm straight stitch. Sew halfway between the two gathering rows, about 7/16 inch from the raw edge. This is the permanent seam that holds the ruffle to the skirt.

Open the ruffle away from the main panel. On the right side, you’ll see the temporary gathering row that you sewed ⅝ inch from the edge. Remove that visible row, then press the seam allowance down toward the ruffle.

6. Press the side hems and position the ties

a placement diagram showing where to attach ties to a stove skirt

Working on the wrong side of the ruffled stove skirt, turn one side edge ¼ inch and press. Turn it another ¼ inch and press again. Carry that same double fold all the way through the short end of the ruffle. The entire left and right edge of the ruffled stove skirt should be hemmed. Repeat on the each side, then press a double ¼-inch hem across the top of the panel of the stove skirt.

Before sewing, lay the skirt wrong side up and measure across the folded top edge. It should measure 24 inches. Place the ties as follows:

  • First and last ties: Align their outside edges with the finished sides of the skirt, at 0 and 24 inches.
  • Five interior ties: Center one tie at each of the 4-, 8-, 12-, 16-, and 20-inch marks.

For each tie, bring its two short ends together to find the midpoint. Open it again and clip that midpoint across the top hem where the stitching will pass. Stitching across the middle of the tie leaves both tails free to tie around the oven handle. Consult my free download for the ruffled stove skirt sewing pattern by signing up at one of the forms in this post.

7. Sew the hems around the stove skirt and reinforce each tie

Sew close to the inner fold of both side hems. Then sew across the top hem, catching the midpoint of each tie as you go. Whenever you reach a tie, sew across it, backstitch over it, and sew forward across it again. That reinforces the spot that gets tugged each time you tie or untie the skirt.

Clip the loose threads and give the skirt a final press. Once the stove is off and cool, tie the skirt to the handle and straighten the ruffle. My favorite part is seeing that long strip turn into a neat row of gathers, with the little blue coops still standing right side up.

a large thumbnail with lettering that says how to sew a stove skirt beside an image of a handmade stove skirt tied to an oven door handle

Fabric, fit, and care questions for my Ruffled Stove Skirt Pattern

How far down the oven door will the skirt hang?

Mine hangs about halfway down the drawer under my oven. Based on the cut dimensions and seam allowances, the finished skirt should measure about 23⅛ inches from the top edge to the ruffle hem, excluding the ties. That’s a calculated length. Hold a measuring tape against your cool oven door to see where the ruffle will fall. The hanging position also depends on how tightly you tie it.

Can I use a contrasting fabric for the ruffle?

Yes. Using the measurements provided in my Ruffled Stove Skirt Pattern, simply cut the ruffle strip from a second woven cotton of similar weight. A blue gingham ruffle would pick up the color of the chicken coops in mine. A solid color would also look pretty if your main panel has a busy print.

Will one yard still work after prewashing?

Measure your pressed fabric. If you have at least 35½ inches of usable width and 32 inches of usable length, all the pieces will fit the two-piece ruffle layout. Consult my ruffled stove skirt pattern for a cutting layout guide. You may need to cut multiple pieces for the ruffle.

How do I wash a cotton stove skirt?

Untie the skirt and follow the care instructions for your cotton. If you used two fabrics, choose a washing and drying method suitable for both. After drying, smooth the gathers by hand and press the panel and ties before hanging it again.

More kitchen sewing projects

Are you loving this ruffled stove skirt pattern? I have lots of other fun tutorials for a handmade home, gifting to friends, and learning to sew. If you have a little coordinating fabric, a set of cloth napkins with mitered corners would carry the same colors over to the kitchen table. If you enjoyed making the ties, try a matching waist apron next.

For another small kitchen project, sew a set of reusable cotton jar and bowl covers or a casserole dish hot pad. You can find more ideas in my free sewing pattern collection.

about the author

Kim is an adventurous mama of 5 who has been building new skills over 16 years of marriage. Over the past decade, she and her family have built a homestead from the ground up, starting with meat and egg chickens, growing into a large garden, and learning to preserve their harvest.

She taught herself to sew, crochet, and knit 13 years ago through books and early YouTube tutorials, and has been making handmade projects ever since.

Cooking from scratch became a necessity and a passion as her family learned to eat more nutritionally and live more frugally. She tests all of her sourdough and fresh milled flour recipes on the kids to ensure they’re delicious and nutritious.

At Plain Living, Kim shares what she’s actually lived — not theory, but the real skills she’s picked up through years of trial, error, and love for her family and home.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.