DIY Waist Apron: Sew to Gift and Sell

What do you buy for that friend that has everything, or that just buys the things they want? Something handmade is just the thing! Try sewing a DIY waist apron in their favorite fabric, or pick a design that reminds you of them. This sewing guide is quick and easy and super beginner friendly. With a few rectangles, and all straight seams, you’ll be able to whip these hard aprons with pockets up in no time for last minute gifts or to sell. This waist apron has a special detail that you won’t see in other DIY tutorials. Keep reading to see how a simple addition can elevate your waist apron!

What is a waist apron?

This may sound silly, but a waist apron is a large piece of cloth that you tie around your waist to protect your clothing while cooking, painting, crafting, etc. You may also hear it called a half apron- presumably because it covers half of your clothes/half of your body. Whatever you want to call it, it’s a cute addition to any homemaker’s outfit.

WAIST APRON WITH POCKETS, OR A HALF APRON

Materials to Make a Waist apron

To make this DIY waist apron, you’ll need the obvious basics like a sewing machine, a measuring tool and a cutting tool. This apron will require about a yard and a half of fabric and you can decide if you want the thread color to bend in or really pop against the color of the fabric. Here are some things to consider, and some of my favorite sewing tools for this project. Some of the links below are affiliate links. This means that, at zero cost to you, I will earn an affiliate commission if you click through the link and finalize a purchase.

Buy quilting cotton for a lightweight waist apron that will stand up to small spills. Quiltling cotton is available in a vast variety of designs, so you can really customize your apron!

Try flannel if you’re thinking the apron might be used for wiping hands a lot! Flannel gets softer and more absorbent every time you wash it.

Canvas is a great choice for slightly heavier duty apron- say for gardening, or as waitress/craft fair style apron.

Linen, gauze, bamboo- really any woven fabric could work to create a unique apron. I highly recommend using something from your stash or heading to a fabric store so you can feel the fabric first. This is also a great project to use up thrifted sheets or table cloths.

Sewing Accessories

Fabric scissors:https://amzn.to/3ZyApn7
Quilting clips:https://amzn.to/3TCQ9lz
Rotary Cutter Kit: https://amzn.to/47yau0O
Beginner Sewing Machine: https://amzn.to/3YcrrLx
Soft measuring tapes: https://amzn.to/4eRf24V
Pins with holder: https://amzn.to/3XQLYDL
Bodkin for turning straps: https://amzn.to/487zSLo

Cut your fabric pieces for your waist apron

(1) Main panel at 30″ x 30″
(2) straps at 4″ x WOF (width of fabric, or from selvage to selvage)
(1) hook at 1″ x 7″
(2) pockets at 10″ x12″

PATTERN PIECES TO CUT OUT FOR A WAIST APRON

Prep the Apron pieces

Take the time to prep all of your pieces before you start sewing. This preparatory step will make your apron a super quick DIY project! Your apron will look so much more professional if you take the time to measure hems and press well and pinning carefully will save you time at the sewing machine.

Main panel: On the back side of the fabric, press the top edge over at 1/2″. Fold it over a second time at 1/2″ and press to create a hem along one long edge. Repeat this to the opposite edge, and pin or clip both hems.

Straps: On one short edge of each strap piece, fold about 1/2″ towards the back of the fabric. Then, fold each strap piece in half length wise, with the pretty sides touching. Pin along the long edge.

Hook: Fold the hook piece in half length wise with the pretty sides facing out and press. Open the fabric back out, and fold one raw edge down to the center crease. Press. Fold the other long edge up to the crease and press. Close up the entire strip and pin. This piece should end up 1/4″ x 1″.

press hook piece in half, then tuck edges in toward crease and press again

Pockets: turn the top edge of the pocket under towards the back of the fabric 1/2 inch and press. Fold it a second time at 1/2′ and press. This hem will be the top fold of the pocket. On the 3 remaining sides, press up 1/2″ once per side. These raw edges will be inside the pocket, and therefore not exposed.

Now to Assemble the Apron!

Straps

First, sew your straps. Along the raw edges, sew a 1/4″ seam, backstitching and beginning and end. Be sure to catch the hem on one end so you don’t have raw edges and the end of your strap. The other end will be enclosed in a seam, so you can leave that side raw. Use a bodkin or large safety pin to turn each strap right side out. Press and top stitch along all 4 edges. Set aside until you’re ready to complete the half apron.

Hook Loop

Next, sew your hook loop. This is a special additions that takes almost no extra time to do! You’ll be able to insert this loop into one of your seams on the back side of the apron so it can be easily hung from a hook. Simply sew down the long edge that has two folds layered on top of each other to close up the tiny strip. Set this aside as well. Consider where you’ll like to sew the hook onto the apron: on the top edge int eh center so the apron draper symmetrically when hung, or somewhere along one of the sides.

Main Panel

Sew the hem on the top edge and bottom edge of your waist apron. If you decided to place your hook on the top edge, be sure to insert it under the folded edge of the hem before sewing. When you sew over the hook, backstitch a couple of time to secure the loop and strengthen the seam. Take the main panel to the iron and press both sides up 1/2′ and then fold a second time 1/2″ and press. Pin these hem in place.

Assemble the Pieces

On each side of the half apron main panel, insert the short raw edges of one strap under the hem, flush with the top of the apron. If you decided to place the loop on one of the sides, insert it under the folded edge of the hem and pin in place. Sew down each short side, backstitching at beginning and end. You have an apron now! But wait, it’s not quite finished!

Fix the straps

The straps will be oriented where the point towards the center back of the center back of the waist apron. Fold them out away from the main panel. You will see that the strap pulls the top edge of the side hem toward the front of the apron. To eliminate this awkward pulling, Lay the apron face down on the table and extend the strap out to the side, pointing away from the apron. Position the strap so that it folds at the stitches on the hem, and overlap the 1/2″ folded hem. Stitch from the top of the strap to the bottom, sewing through both the strap and the side hem of the main panel. The strap will now be oriented correctly without flipping the side hem out. Repeat to the other side.

Finish up!

Finally, lay your apron on the table face up. Pin the pockets to the front of the apron, face up. To position them correctly, measure the distance from the top edge of the main panel to the top left corner of the pocket and the top right corner of the pocket. These measurements must match, or the pocket will be crooked! Sew the left side, bottom, and right side of the pocket onto the main panel, about 1/8″ from the folded edge. This is a great place to lengthen then stitch for topstitching. Trim all your threads and you’re done! You’ve sewn a custom DIY waist apron in no time flat!

Gift Ideas for a Waist Apron

This handmade gift is sure to please any recipient! Turn it into a little gift basket by pairing it with one of these ideas:

seed packets, garden gloves, hand tools
paint brushes and a canvas
wooden spoons, a homemade dry mix
matching scrunchie from your leftover fabric
a crochet wash cloth and non-toxic cleaning supplies(homemade is even better)
a collection of useful tools for a homemaker ( a fancy pen, a small notebook, scissors, hair tie or clip, nail file, bandaids, anymore!)

What will you use this waist apron for? Please share your ideas!